I have printed out the Block Design sheets (use the link in the book, see page 16 in the book, under Block Construction heading.
Using the crayon colored page shown in the previous post...I transferred all of the Fabric Palette color references (ALPHA) to each page (block) of design sheets. Here in Block #1 you can see (above) that I will be using the fabrics A, K, H, and B for this block construction.
My next preparation task is to take my Foundation Fabric and cut out a rectangle large enough to hold the TRIANGLE block size. For me, I cut up some cotton in a light color...27 blocks...measuring about 6 1/2" x 10 1/2" to hold the full block dimensions. Now, I will use my light box to trace each block diagram using a #2 lead pencil. I will trace the inside and outside shape lines lines (1 solid, 1 red dot) on to the fabric. Then, I will trace the red dashed lines that mark the Fabric Seam Line (see where the pencil point above it indicating) on to the foundation fabric block outline.Block #1 - Here you will see that I've flipped the paper page over on my light table. I traced (using a ruler) the solid black TRIANGLE shape and the most outer (red dashed line) triangle shape. Then I've added the inside seam lines (red dashed lines).
Here is what the traced lines look like, after I have turned off the light box. I will also add the "Letter" of the fabric piece to each patch to help me remember...and hopefully, speed up the addition of the color fabric patches to the front of this Foundation Fabric. Remember than the pencil lines are on the back side...which is why I reversed the paper page pattern on my light box.
No comments:
Post a Comment
Your comments make me smile! All comments are moderated, so they will not appear immediately.
Kathy